Speak with Substance |
|
|
|
 |
|
|
||
Speak with Substance |
|
|
|
|
|
|
||
Here is how Paul makes wooden frames: Glueing the Frame-Pt 3
 |
Layout all 4 legs of one frame on a small board...rabbit to rabbit. (Also layout 4 "thumbnail inserts" for later) |
 |
Put glue in the thumbnail grooves and over entire cut surface.
5 min setup
|
| Pick up a pair of legs and rub together to smear glue evenly; set pieces down so they make a frame, rabbit side up. Place the "thumbnail insert" into the groove and...
|
 |
 |
tap in with a hammer. |
| All 4 inserts must be in place at the end of 5 minutes from first applying the glue!! | |
 |
Wipe off any glue that appears to be white globs on the frame front AND |
 |
wipe clean the rabbit. You don't want there to be a dried glob holding the glass from being flat! (screwdriver is a handy tool for precision glue removal) |
 |
Cure for 3 hours by laying frame flat. You can lay frames on top of one another. If one doesn't want to lay flat, apply a weight. |
GOTO Fill&Sand the Corners-Pt 4 |
|
