Speak with Substance
       Surround your vision with a frame
            call   503 625-7937

 

 

  

Jump to Frame Sample Sitemap

 Jump to Strength in Perspective Companion Site

Go Home

Here is how Paul makes wooden frames: Thumbnail the Chop-Pt 2
 

 

 

Place 2 "legs" into the thumbnailer, rabbit side up.
 

 

 

Turn the knob till pressure holds them in place.

Turn the dial on the back to the correct "depth".
 (This size wood takes a 2)
Notice there's a blade inside the plastic cylinder.

Use the handle at the back to place the blade at the center of the angled part of the "leg".
That will set the "position".

 
Keep the same "position" and "depth" for all the legs of the frame.

Put the vacuum hose on the tube coming from the thumbnailer.

Put on EAR PROTECTION.
Turn on the thumbnailer switch.

Pull the handle both toward you, then away from you to make the notches.

It is wise to hold the 2 "legs" with your left hand so they don't move.

Loosen the knob. Turn the "legs" end for end and repeat.

 Do 2 pair.

 

GOTO    Glueing the Frame-Pt3