Speak with Substance
       Surround your vision with a frame
            call   503 625-7937

 

 

  

Jump to Frame Sample Sitemap

 Jump to Strength in Perspective Companion Site

Go Home

Here is how Paul makes wooden frames:  Making the Chop-Pt 1
 

Start by making a sketch of :
the picture size
 the frame size.

For this 18X22 frame,
 buy 8' moulding.

 
Cut a +45 degree edge on one  end.
To make the 18" side:

With the rabbit side up, place a ruler on the cut end.  Make a mark with a WASHABLE child's marker at 3/16ths past the 18" mark.
Push the base-handle latch down.
Rotate the saw base to -45 degrees.
Turn on the Vacuum system which has been connected to the saw.

Line up the mark---squeeze and pull down the saw-handle to cut
NOW-return to the first end and cut off 1/16th inch! 
That leaves a length of 18 1/8" for  the 18" side.  Make 2.
Repeat the process with the 22" side. Make 2.

GOTO      Thumbnailing the Chop-Pt 2